Dynamic VPN Installation Guide

Dynamic VPN Installation Guide

Dynamic VPN Installation Guide 

Author: Jiro Vito Cruz 
Date: March 13, 2026 

Shape 

1. Download the VPN Installer 

Go to the following link to download the VPN installer: 

https://software.watchguard.com/SoftwareDownloads?current=true&familyId=a2RVr000000bJA9MAM 

Two versions of the software are available: 

  • Windows – for Windows computers 

  • macOS – for Mac computers 

Download the version that matches your operating system.  

 

 

Shape 

2. Open the Downloaded File 

Once the download begins, the file will appear in your browser’s Downloads section (usually at the top right). 

After the download completes: 

  1. Click Open File 

  1. The installer will start automatically. 

 

Shape 

3. Run the Installation 

When the setup window appears: 

  1. Click Next to begin the installation. 

  1. Leave the default installation settings unless instructed otherwise. 

  1. Continue clicking Next until you reach the installation screen. 


 

 

 

 

 

 

 

 

 

 

 







 

 

 

 

 

 

4. Complete the Installation 

During the installation process: 

  1. Select Create a desktop icon 

 

 

  1. Click Install 


 

Once the installation finishes: 


  1. Click Finish to close the setup wizard. 

 

 

 

 

 

Shape 







5. Connect to the VPN 

After installation, open WatchGuard Mobile VPN with SSL. 

Enter your Dynamic Language Microsoft 365 credentials: 

Username: Your Dynamic Language email username 
Password: Your Microsoft 365 password 

For the Server, enter: 

vpn.dynamiclanguage.com 

Then click Connect. 

If the server address above does not work, you can use the backup server IP: 

75.151.106.233


 

 

 

 

 

6. Verify VPN Connection 

If the connection is successful, you will see a WatchGuard notification near the system clock indicating that the VPN is connected.  

 

 

To disconnect or exit the VPN you will need to go to the arrow on the bottom right and click. 

 

 

The box bellow will appear 

 

 

 

 

 



 

You should be able to see the Watchguard W icon in green which means you are connected. To Exit or disconnect just right-click on the icon and click disconnect or exit.